Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 º of more than 25 N/cm (as determined by the ASTM D 3330 method)

Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesive layer and a release sheet

Reflecting film consisting of - a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, - a layer of an acrylic resin having embedded glass beads, - a layer of an acrylic resin hardened by a melamine cross-linking agent, - a metal layer, - an acrylic adhesive, and - a release film

Rolls of polyethylene foil: - self-adhesive on one side, - of a total thickness of 0,025 mm or more, but not more than 0,09 mm, - of a total width of 60 mm or more, but not more than 1 110 mm, of a kind used for the protection of the surface of products of headings 8521 or 8528

Self-adhesive reflecting sheet whether or not in segmented pieces, - whether or not containing a watermark, - with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: - a layer of acrylic or vinyl polymer, - a layer of poly(methyl methacrylate) or polycarbonate containing microprisms, - a layer of metallisation, - an adhesive layer, and - a release sheet - whether or not containing an additional layer of polyester

Self adhesive reflecting film, consisting of several layers including: - a copolymer of acrylic resin, - polyurethane, - a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, - glass microspheres, and - an adhesive layer, with a release liner on one or both sides

Poly(vinyl chloride) or polyethylene or any other polyolefine film: - of a thickness of 65 µm or more, - coated on one side with an acrylic UV-sensitive adhesive and a polyester liner

Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers, of plastics

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production))

Transparent poly(ethylene terephthalate) self-adhesive film: - free from impurities or faults, - coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound, - whether or not with a printable dust-proof layer of modified long chain alkyl organic compound, - with a total thickness without the liner of 54 μm or more but not more than 64 μm, and - a width of more than 1 295 mm but not more than 1 305 mm

Polyester film: - coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and - on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner

Polytetrafluoroethylene film, - with a thickness of 50 µm or more but not more than 155 µm, - with a width of 6,30 mm or more but not more than 585 mm, - an elongation at break of not more than 200 %, and - coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 40 µm

Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more but not more than 160 cm

Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner

Reflecting laminated sheet: - consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, - covered on both sides with one or more layers of plastic material and - covered on one side with an adhesive layer and a release sheet