Floor coverings of polymers of vinyl chloride, whether or not self-adhesive, in rolls or in the form of tiles (excl. those on a backing coated, impregnated or covered with poly"vinyl chloride")

Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles, and wall or ceiling coverings in rolls with a width of >= 45 cm, consisting of a layer of plastics fixed permanently on a backing of any material other than paper, the face side of which is grained, embossed, coloured, design-printed or otherwise decorated (excl. coverings of polymers of vinyl chloride)

Plastic strips of poly"vinyl chloride" or of polyethylene, coated with unvulcanised natural or synthetic rubber, self-adhesive, in rolls <= 20 cm wide

Plastic strips of polypropylene, coated with unvulcanised natural or synthetic rubber, self-adhesive, in rolls <= 20 cm wide

Plastic strips, coated with unvulcanised natural or synthetic rubber, self-adhesive, in rolls <= 20 cm wide (excl. such products of poly"vinyl chloride", polyethylenes or polypropylenes)

Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, in rolls <= 20 cm wide (excl. plastic strips coated with unvulcanised natural or synthetic rubber)

Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

Polyester film: - coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and - on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner

Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

Polytetrafluoroethylene film: - with a thickness of 100 µm or more, - an elongation at break of not more than 100 %, - coated on one side with a pressure sensitive silicon adhesive

Black poly(vinyl chloride) film: •with a gloss of more than 30 degrees according to ASTM D2457, •whether or not covered on one side with a protective poly(ethylene terephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner

Ethylene vinyl acetate film: - of a thickness of 100 µm or more, - coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner

Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm

Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs