Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper

Polyethylene in blocks of irregular shape, lumps, powders, granules, flakes and similar bulk forms, of a specific gravity of >= 0,958 at 23°C, containing <= 50 mg/kg of aluminium, <= 2 mg/kg of calcium, of chromium, of iron, of nickel and of titanium each and <= 8 mg/kg of vanadium, for the manufacture of chlorosulphonated polyethylene

Polyethylene with a specific gravity of >= 0,94, in primary forms (excl. polyethylene in blocks of irregular shape, lumps, powders, granules, flakes and similar bulk forms, of a specific gravity of >= 0,958 at 23°C, containing <= 50 mg/kg of aluminium, <= 2 mg/kg of calcium, of chromium, of iron, of nickel and of titanium each and <= 8 mg/kg of vanadium, for the manufacture of chlorosulphonated polyethylene)

Ethylene-vinyl acetate copolymers, in primary forms

Ethylene-alpha-olefin copolymers, having a specific gravity of < 0,94 , in primary forms

Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid, in primary forms, and A-B-A block copolymer of ethylene of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight <= 35% of styrene, in blocks of irregular shape, lumps, powders, granules, flakes and similar bulk forms

Polymers of ethylene, in primary forms (excl. polyethylene, ethylene-vinyl acetate copolymers, ethylene-alpha-olefins copolymers having a specific gravity of < 0,94, ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid and A-B-A block copolymer of ethylene of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight <= 35% of styrene, in blocks of irregular shape, lumps, powders, granules, flakes and similar bulk forms)

Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with - an acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), and - a melt flow rate of 14g/10 min (MFR 125 °C/2.16 kg, ASTM D1238) or more

Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: - an acrylic acid content of 6 % or more but not more than 50 % by weight, and - a melt flow rate of 1g/10 min or more at 190 °C/2.16 kg (measured using ASTM D1238)

Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more

Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, with a melt flow rate of 1,3g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)

Mixture containing by weight - 80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and - 6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)

Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid

Chlorosulphonated polyethylene

Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets