Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87

Suspension systems and parts thereof, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.80.20, shock-absorbers, anti roll bars, torsion bars and those of closed-die forged steel)

Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 87

Aluminium suspension link arm, with dimensions of: -a height of 50 mm or more but not more than 150 mm, -a width of 10 mm or more but not more than 100 mm, -a length of 100 mm or more but not more than 600 mm, -a mass of 1000 g or more but not more than 3000 g, Equipped with at least two bushed holes made of aluminium alloy with the following characteristics: -a tensile strength of 200 mPa or more , -a strength of 19 kN or more, -a stiffness of 5 kN/mm or more but not more than 9 kN/mm, -a frequency of 400 Hz or more but not more than 600 Hz

Radiators and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" of a cylinder capacity <= 2500 cm³ or with spark-ignition internal piston engine of a cylinder capacity <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s

Keypads of silicone or plastic, - whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, - whether or not printed or surface treated, - whether or not with electrical conducting elements, - whether or not with keypads foil glued on the keyboard, - whether or not with protective foil, - single or multilayer

Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87

Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with: - an insulating area flatness of not more than 0,1 mm, - a permissible particle quantity of 0,3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of not more than 0,4 mm, and - not more than 3 pores larger than 0,2mm of a kind used in heat exchangers for car cooling systems

Radiators for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.91.20)

Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87

Parts for radiators, of closed-die forged steel, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.91.20)

Parts for radiators, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.91.20 and those of closed-die forged steel)

Keypads of silicone or plastic, - whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, - whether or not printed or surface treated, - whether or not with electrical conducting elements - whether or not with keypads foil glued on the keyboard - whether or not with protective foil - single or multilayer

Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with: - an insulating area flatness of not more than 0,1 mm, - a permissible particle quantity of 0,3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of not more than 0,4 mm, and - not more than 3 pores larger than 0,2mm of a kind used in heat exchangers for car cooling systems

Assembly for supplying compressed air, whether or not with a resonator, comprising at least: - one solid aluminium tube whether or not with mounting bracket, - one flexible rubber hose, and - one metal clip for use in the manufacture of goods of Chapter 87