Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, of kind used in the manufacture of goods of Chapter 87

Multi-measurement wire harness: - of a voltage of 5 V or more but not more than 90 V, - capable of transmitting information for use in the manufacture of vehicles of heading 8711

Extension two-core cable with two connectors, containing at least: - a rubber grommet, - a metal attachment bracket of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87

Electric conductors of a kind used for telecommunications, for a voltage <= 1.000 V, insulated, fitted with connectors, n.e.s.

Electric conductors, for a voltage <= 1.000 V, insulated, fitted with connectors, n.e.s. (other than of a kind used for telecommunications)

Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with: - a voltage of 1,25 V (± 0,25 V) - connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm, - outer screening shielding, used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits

PVC isolated flexible eight wire cable with: - a length of not more than 2100 mm - an operating voltage of 5V or more, but not more than 35V - a temperature resistance of not more than 80°C - either an over-moulded 7 pin round 270° DIN male connector, a 6 pin A1101 male connector or a 8 pin A1001 male connector on one end and - at least two stripped and tinned wires on the other end - whether or not with mounted rubber pad with integrated strain relief

PET/PVC insulated flexible cable with: - a voltage of not more than 60 V, - a current of not more than 1 A, - a heat resistance of not more than 105 °C, - individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm), - a distance between conductors of not more than 0,5 mm and - a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm

PVC isolated flexible cable with: - a length of not more than 1800 mm - an operating voltage of 5V or more, but not more than 35V - a heat resistance of not more than 80°C - an over-moulded 8 pin MiniFit male connector on one end - either a 6 pin MiniFit socket or two over-moulded AMP connectors on the other end - a over-moulded resistor inside the connector and - a moulded strain relief on the cable - whether or not with a over-moulded diode inside a connector

PVC isolated flexible six or eight wire cable with: - a length of not more than 1300 mm - an operating voltage of 5V or more, but not more than 35V - a heat resistance of not more than 80°C - either an over-moulded 8 pin MiniFit male connector or an over-moulded 6-pin DIN male connector on one end and - either an over-moulded 8 pin MiniFit socket or an 8 pin MicroFit male connector on the other end

Wire harness of the steering system with an operating voltage of 12 V, equipped with connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor vehicle steering box

Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, of kind used in the manufacture of goods of Chapter 87

Extension two-core cable with two connectors, containing at least: - a rubber grommet, - a metal attachment bracket of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87

Electric conductors: - of a voltage of not more than 80 V, - with a length of not more than 120 cm, - fitted with connectors, for use in the manufacture of hearing aids, accessory kits and speech processors

12-wire connecting cable containing two connectors - of a voltage of 5 V, - with a length of not more than 300 mm for use in the manufacture of goods of Chapter 87